Cold Spray Technology Book
Score: 1
From 1 Ratings

Cold Spray Technology

  • Author : Anatolii Papyrin
  • Publisher : Elsevier
  • Release Date : 2006-10-04
  • Genre: Science
  • Pages : 336
  • ISBN 10 : 008046548X

Cold Spray Technology Book Description :

The topic of this book is Cold Spray technology. Cold Spray is a process of applying coatings by exposing a metallic or dielectric substrate to a high velocity (300 to 1200 m/s) jet of small (1 to 50 μm) particles accelerated by a supersonic jet of compressed gas. This process is based on the selection of the combination of particle temperature, velocity, and size that allows spraying at the lowest temperature possible. In the Cold Spray process, powder particles are accelerated by the supersonic gas jet at a temperature that is always lower than the melting point of the material, resulting in coating formation from particles in the solid state. As a consequence, the deleterious effects of high-temperature oxidation, evaporation, melting, crystallization, residual stresses, gas release, and other common problems for traditional thermal spray methods are minimized or eliminated. This book is the first of its kind on the Cold Spray process. Cold Spray Technology covers a wide spectrum of various aspects of the Cold Spray technology, including gas-dynamics, physics of interaction of high-speed solid particles with a substrate as well as equipment, technologies, and applications. Cold Spray Technology includes the results of more than 20 years of original studies (1984-2005) conducted at the Institute of Theoretical and Applied Mechanics of the Siberian Division of the Russian Academy of Science, as well as the results of studies conducted at most of the research centres around the world. The authors' goal is threefold. The first goal is to explain basic principles and advantages of the Cold Spray process. The second goal is, to give practical information on technologies and equipment. The third goal is to present the current state of research and development in this field over the world. The book provides coverage and data that will be of interest for users of Cold Spray technology as well as for other coating experts. At the present time the Cold Spray method is reco

The Cold Spray Materials Deposition Process Book

The Cold Spray Materials Deposition Process

  • Author :
  • Publisher : Elsevier
  • Release Date : 2007-09-21
  • Genre: Technology & Engineering
  • Pages : 376
  • ISBN 10 : 9781845693787

The Cold Spray Materials Deposition Process Book Description :

The cold spray process produces dense, low oxide coatings which can be used in such diverse applications as corrosion control and metals repair. It has emerged as an important alternative to thermal spray coating techniques in certain areas. This pioneering book reviews both the fundamentals of the process and how it can best be applied in practice. The first part of the book discusses the development of the process together with its advantages and disadvantages in comparison with thermal spray coating techniques. Part two reviews key process parameters such as powders, nozzle design, particle temperature and velocity, and particle/substrate interaction. It also describes portable and stationary cold spray systems. The final part of the book discusses how the cold spray process can be applied in such areas as improved wear, corrosion protection, electromagnetic interference shielding and repair of damaged components. The cold spray materials deposition process is a standard reference on this important process and its industrial applications. Examines the fundamentals of the cold spraying process Assesses how the technique can best be applied in practice Describes portable and stationary cold spray systems

Modern Cold Spray Book

Modern Cold Spray

  • Author : Julio Villafuerte
  • Publisher : Springer
  • Release Date : 2015-08-24
  • Genre: Technology & Engineering
  • Pages : 429
  • ISBN 10 : 9783319167725

Modern Cold Spray Book Description :

This book focuses on the current state of the art of the novel cold spray process. Cold spray is a solid state metal consolidation process, which allows engineers to tailor surface and shape properties by optimizing process parameters, powder characteristics and substrate conditions for a wide variety of applications that are difficult or impossible by other techniques. Readers will benefit from this book's coverage of the commercial evolution of cold spray since the 1980's and will gain a practical understanding of what the technology has to offer.

Cold Spray in the Realm of Additive Manufacturing Book

Cold Spray in the Realm of Additive Manufacturing

  • Author : Sunil Pathak
  • Publisher : Springer Nature
  • Release Date : 2020-05-12
  • Genre: Technology & Engineering
  • Pages : 245
  • ISBN 10 : 9783030427566

Cold Spray in the Realm of Additive Manufacturing Book Description :

This book sheds light on the development of the cold spray process in applications of additive manufacturing (AM) and repair/remanufacturing engineering. It covers the process fundamentals of different cold spray techniques, namely low pressure cold spray and high pressure cold spray process. Bonding mechanism and powder substrate interface are an important part of the book. The chapters present the recent developments in materials used in cold spraying for AM and various coating applications. The latest research in this area as well as possible avenues of future research are also highlighted as a way to encourage the researchers.

Handbook of Thermal Spray Technology Book
Score: 5
From 1 Ratings

Handbook of Thermal Spray Technology

  • Author : Joseph R. Davis
  • Publisher : ASM International
  • Release Date : 2004-01-01
  • Genre: Reference
  • Pages : 338
  • ISBN 10 : 9780871707956

Handbook of Thermal Spray Technology Book Description :

This reference covers principles, processes, types of coatings, applications, performance, and testing and analysis of thermal spray technology. It will serve as an introduction and guide for those new to thermal spray, and as a reference for specifiers and users of thermal spray coatings and thermal spray experts. Coverage encompasses basics of th

Cold Spray Coatings Book

Cold Spray Coatings

  • Author : Pasquale Cavaliere
  • Publisher : Springer
  • Release Date : 2017-11-08
  • Genre: Technology & Engineering
  • Pages : 570
  • ISBN 10 : 9783319671833

Cold Spray Coatings Book Description :

This book combines the contributions of experts in the field to describe the behavior of various materials, micromechanisms involved during processing, and the optimization of cold-spray technology. It spans production, characterization, and applications including wear resistance, fatigue, life improvement, thermal barriers, crack repair, and biological applications. Cold spray is an innovative coating technology based on the kinetic energy gained by particles sprayed at very high pressures. While the technique was developed in the 1990s, industrial and scientific interest in this technology has grown vastly in the last ten years. Recently, many interesting applications have been associated with cold-sprayed coatings, including wear resistance, fatigue life improvement, thermal barriers, biological applications, and crack repair. However, many fundamental aspects require clarification and description.

Powder Consolidation Using Cold Spray Book

Powder Consolidation Using Cold Spray

  • Author : Atieh Moridi
  • Publisher : Springer
  • Release Date : 2016-11-10
  • Genre: Technology & Engineering
  • Pages : 127
  • ISBN 10 : 9783319299624

Powder Consolidation Using Cold Spray Book Description :

This book first presents different approaches to modeling of the cold spray process with the aim of extending current understanding of its fundamental principles and then describes emerging applications of cold spray. In the coverage of modeling, careful attention is devoted to the assessment of critical and erosion velocities. In order to reveal the phenomenological characteristics of interface bonding, severe, localized plastic deformation and material jet formation are studied. Detailed consideration is also given to the effect of macroscopic defects such as interparticle boundaries and subsequent splat boundary cracking on the mechanical behavior of cold spray coatings. The discussion of applications focuses in particular on the repair of damaged parts and additive manufacturing in various disciplines from aerospace to biomedical engineering. Key aspects include a systematic study of defect shape and the ability of cold spray to fill the defect, examination of the fatigue behavior of coatings for structural applications, and a novel working window at subcritical conditions to obtain porous structures. This book is exceptional in scope, and its review of finite element modelling at different length scales sheds light on future design and process improvement in emerging applications such as structural repair, metal additive manufacturing and metal foam design.

High Pressure Cold Spray Book

High Pressure Cold Spray

  • Author : C. M. Kay
  • Publisher :
  • Release Date : 2016-06
  • Genre: Coating processes
  • Pages : 324
  • ISBN 10 : 1627080961

High Pressure Cold Spray Book Description :

This book is a highly practical and useful ""go-to"" resource that presents an in-depth look at the high pressure cold spray process and describes applications in various industries. Cold spray continues to be the fastest developing spray technology over the last decade, and a significant number of scientists, engineers, and technologists are joining the cold spray community around the globe. The technology is relatively young and work is being simultaneously pursued in universities, research centers, and in many high tech industries. As this novel technology spreads quickly into many new application areas, there is a large need for an authoritative source of information. This new book addresses this need and will be indispensable to universities, libraries, and those involved in thermal spray. It presents baseline information on design and modeling, materials science of engineered coatings, and specific applications in various high tech industries, and is also a hands-on resource for cold spray operators.

Cold Gas Dynamic Spray Book

Cold Gas Dynamic Spray

  • Author : Roman Gr. Maev
  • Publisher : CRC Press
  • Release Date : 2016-04-27
  • Genre: Technology & Engineering
  • Pages : 334
  • ISBN 10 : 9781466584433

Cold Gas Dynamic Spray Book Description :

Your Guide to Advanced Cold Spray Technology Cold Gas Dynamic Spray centers on cold gas dynamic spray (or cold spray—CS) technology, one of the most versatile thermal spray coating methods in materials engineering, and effectively describes and analyzes the main trends and developments behind the spray (coating) techniques. The book combines theory with practice to enable the reader to deeper understand the CS coatings as well as their structures and properties, and describes the state of the art in CS technology with an emphasis on all major components of the cold spray process. This book begins with an introduction to CS spray and goes on to thoroughly explain the process. It describes the different powder synthesis methods and equipment currently used, and defines the CS coating microstructure, characterization methods, and properties of CS coatings. The authors present a comprehensive approach that highlights grit blasting and cold spraying as well as the hybrid CS-sintering technology that offers integrity of microstructure, compositional homogeneity, and mechanical property levels equal to (and frequently better than) those of the wrought counterpart. The book largely covers the basic principles of CS technology and also includes: A brief survey of thermal spray methods The basic principles of plasticity theory A description of the CS equipment, the nozzle design, and the geometry of a CS gun Coverage of the microstructural and mechanical properties of CS metals and alloys A detailed analysis of aircraft component repair using GS An overview of the economic aspects of CS applications. Cold Gas Dynamic Spray explains how cold gas dynamic spray works and what it can do, and is intended for engineering professionals working with sprays and coatings in the industry as well as graduate student specializing in material science, mechanical, automotive, aerospace, and chemical engineering.

Numerical and Experimental Characterization of the Cold Spray Process for Spraying Nano Particle Powders Book

Numerical and Experimental Characterization of the Cold Spray Process for Spraying Nano Particle Powders

  • Author : Abdulaziz Alhulaifi
  • Publisher :
  • Release Date : 2011
  • Genre:
  • Pages : 374
  • ISBN 10 : OCLC:756786408

Numerical and Experimental Characterization of the Cold Spray Process for Spraying Nano Particle Powders Book Description :

The cold spray deposition process involves the acceleration of solid particles to high velocity by a carrier gas which is often supersonic, and the subsequent impingement of this high velocity, particle laden jet onto a substrate. In order for deposition to occur, i.e. in order for the solid particles to bond to the substrate, the impact velocity of the particles must be equal to or greater than some critical value. To determine an estimate of this critical velocity, the energy principle was used to predict a critical impact velocity based on material properties. It has been shown that during its interaction with the substrate, a particle should reach around 70% of its melting temperature to obtain good mechanical bonding. Using computational fluid dynamic models (CFD), a novel Aerodynamic Focusing Nozzle (AFN) using helium as the carrier gas, was developed and experimentally tested. The CFD models showed that a lighter gas such a helium must be used for the nanoparticles to reach critical velocity and penetrate the normal shockwave upstream of the substrate with sufficient inertia. A prototype AFN nozzle was fabricated using a rapid prototype machine and used to cold spray 300 nm diameter particles onto both aluminum and Kapton substrates at room temperature. Additional validation of the feasibility of the design was obtained through the deposition of a thin conductive copper layer of Kapton. This research focuses on the numerical modeling, as well as the construction and experimentation required for the development of the AFN for cold spraying nanoparticles. To characterize the results in a general way, a non-dimensionalization of all the factors involved was conducted and validated to determine the combination of cold spray process parameters required for the particle to reach the critical impact velocity and temperature.

Thermal Spray Fundamentals Book
Score: 5
From 1 Ratings

Thermal Spray Fundamentals

  • Author : Pierre L. Fauchais
  • Publisher : Springer Science & Business Media
  • Release Date : 2014-01-24
  • Genre: Technology & Engineering
  • Pages : 1566
  • ISBN 10 : 9780387689913

Thermal Spray Fundamentals Book Description :

This book provides readers with the fundamentals necessary for understanding thermal spray technology. Coverage includes in-depth discussions of various thermal spray processes, feedstock materials, particle-jet interactions, and associated yet very critical topics: diagnostics, current and emerging applications, surface science, and pre and post-treatment. This book will serve as an invaluable resource as a textbook for graduate courses in the field and as an exhaustive reference for professionals involved in thermal spray technology.

Future Development of Thermal Spray Coatings Book

Future Development of Thermal Spray Coatings

  • Author : Nuria Espallargas
  • Publisher : Elsevier
  • Release Date : 2015-06-29
  • Genre: Science
  • Pages : 300
  • ISBN 10 : 9780857097743

Future Development of Thermal Spray Coatings Book Description :

Future Development of Thermal Spray Coatings discusses the latest developments and research trends in the thermal spray industry. The book presents a timely guide to new applications and techniques. After an introduction to thermal spray coatings by the editor, Part One covers new types and properties of thermal spray coatings. Chapters look at feedstock suspensions and solutions, the application of solution precursor spray techniques to obtain ceramic films and coatings, cold spray techniques and warm spray technology amongst others. Part Two of the book moves on to discuss new applications for thermal spray coatings such as the use of thermal spray coatings in environmental barrier coatings, thermal spray coatings in renewable energy applications and manufacturing engineering in thermal spray technologies by advanced robot systems and process kinematics. Timely guide on the current advancements and research trends in thermal spray technology Reviews different types of thermal spray coatings Presents a wide variety of applications for this emerging technology

Advanced Nanomaterials and Coatings by Thermal Spray Book

Advanced Nanomaterials and Coatings by Thermal Spray

  • Author : Guan-Jun Yang
  • Publisher : Elsevier
  • Release Date : 2019-04-15
  • Genre: Technology & Engineering
  • Pages : 524
  • ISBN 10 : 9780128138700

Advanced Nanomaterials and Coatings by Thermal Spray Book Description :

Advanced Nanomaterials and Coatings by Thermal Spray focuses on the design, preparation, characterization and application of advanced coating materials for promising industries via thermal spray. Chapters introduce the potential applications of advanced nanocoating materials, the unique characteristics of thermal sprayed nanocoating, the design and processing of nanopowders, and discuss various nanocoating materials and their microstructure/properties. In addition, nanomaterials with unique characteristics are presented, i.e., the dendrite or feather-like nanomaterials by suspension spray or plasma spray-physical vapor deposition hybrid technology. This book will serve as an excellent resource for both researchers and individuals in industry. Provides a comprehensive overview of the field of advanced nanocoatings materials and the use of thermal spray methods Discusses the connections between the design, preparation, characteristics and applications of thermal spray nanocoatings Reviews the properties and potential application of nanocoating materials, providing professionals with a guide on which nanocoatings have potential for their detailed requirements and development choices

The Science and Engineering of Thermal Spray Coatings Book

The Science and Engineering of Thermal Spray Coatings

  • Author : Lech Pawlowski
  • Publisher : John Wiley & Sons
  • Release Date : 2008-04-30
  • Genre: Science
  • Pages : 656
  • ISBN 10 : 9780470754078

The Science and Engineering of Thermal Spray Coatings Book Description :

This extensively updated and revised version builds on the success of the first edition featuring new discoveries in powder technology, spraying techniques, new coatings applications and testing techniques for coatings -- Many new spray techniques are considered that did not exist when the first edition was published! The book begins with coverage of materials used, pre-spray treatment, and the techniques used. It then leads into the physics and chemistry of spraying and discusses coatings build-up. Characterization methods and the properties of the applied coatings are presented, and the book concludes with a lengthy chapters on thermal spray applications covers such areas as the aeronautics and space, automobiles, ceramics, chemicals, civil engineering, decorative coatings, electronics, energy generation and transport, iron and steel, medicine, mining and the nuclear industries.

Cold Spray Coatings Book

Cold Spray Coatings

  • Author : G. Sundararajan
  • Publisher : Academic Press
  • Release Date : 2016-06-13
  • Genre: Technology & Engineering
  • Pages : 208
  • ISBN 10 : 0128030380

Cold Spray Coatings Book Description :

Cold Spray Coatings

Nanostructured Coatings Book

Nanostructured Coatings

  • Author : Albano Cavaleiro
  • Publisher : Springer Science & Business Media
  • Release Date : 2007-02-19
  • Genre: Technology & Engineering
  • Pages : 648
  • ISBN 10 : 9780387487564

Nanostructured Coatings Book Description :

This book delivers practical insight into a broad range of fields related to hard coatings, from their deposition and characterization up to the hardening and deformation mechanisms allowing the interpretation of results. The text examines relationships between structure/microstructure and mechanical properties from fundamental concepts, through types of coatings, to characterization techniques. The authors explore the search for coatings that can satisfy the criteria for successful implementation in real mechanical applications.

CFD Modeling and Simulation in Materials Processing 2016 Book

CFD Modeling and Simulation in Materials Processing 2016

  • Author : Lifeng Zhang
  • Publisher : John Wiley & Sons
  • Release Date : 2016-02-08
  • Genre: Technology & Engineering
  • Pages : 304
  • ISBN 10 : 9781119274650

CFD Modeling and Simulation in Materials Processing 2016 Book Description :

This collection explores computational fluid dynamics (CFD) modeling and simulation of engineering processes, with contributions from researchers and engineers involved in the modeling of multiscale and multiphase phenomena in material processing systems. The papers cover the following processes: Iron and Steelmaking (Tundish, Casting, Converter, Blast Furnace); Microstructure Evolution; Casting with External Field Interaction; and Smelting, Degassing, Ladle Processing, Mechanical Mixing, and Ingot Casting. The collection also covers applications of CFD to engineering processes, and demonstrates how CFD can help scientists and engineers to better understand the fundamentals of engineering processes.

Introduction to Low Pressure Gas Dynamic Spray Book

Introduction to Low Pressure Gas Dynamic Spray

  • Author : Roman Gr. Maev
  • Publisher : John Wiley & Sons
  • Release Date : 2009-08-14
  • Genre: Technology & Engineering
  • Pages : 244
  • ISBN 10 : 9783527621910

Introduction to Low Pressure Gas Dynamic Spray Book Description :

Written by the inventor of the Gas Dynamic Spray (GDS) technique, this first monograph on the topic brings the understanding of the GDS coating formation process to a new qualitative nanostructural level, while introducing it to industrial and technological experts so that they can develop a new generation of coatings materials. Representing the results of over ten years of research in the field, the material discussed here covers nearly every aspect of the physical principles and applications of the GDS process, including topics in applied solid state physics, materials science, nanotechnology, and materials characterization. With contributions from researchers working in various laboratories, academic institutions and industries, this book is written for those wishing to apply this novel spraying technology in industry and who are involved in the development of new specific material properties, whether engineers or experts in the automotive, aircraft, household machinery, nuclear power, materials development or other industries.

Aircraft Sustainment and Repair Book
Score: 5
From 1 Ratings

Aircraft Sustainment and Repair

  • Author : Rhys Jones
  • Publisher : Butterworth-Heinemann
  • Release Date : 2017-12-15
  • Genre: Technology & Engineering
  • Pages : 970
  • ISBN 10 : 9780081005446

Aircraft Sustainment and Repair Book Description :

Aircraft Sustainment and Repair is a one-stop-shop for practitioners and researchers in the field of aircraft sustainment, adhesively bonded aircraft joints, bonded composites repairs, and the application of cold spray to military and civil aircraft. Outlining the state-of-the-art in aircraft sustainment, this book covers the use of quantitative fractography to determine the in-service crack length versus flight hours curve, the effect of intergranular cracking on structural integrity and the structural significance of corrosion. The book additionally illustrates the potential of composite repairs and SPD applications to metallic airframes. Covers corrosion damage assessment and management in aircraft structures Includes a key chapter on U.S. developments in the emerging field of supersonic particle deposition (SPD) Shows how to design and assess the potential benefits of both bonded composite repairs and SPD repairs to metallic aircraft structures to meet the damage tolerance requirements inherent in FAA ac 20-107b and the U.S. Joint Services