Robust Process Development and Scientific Molding Book
Score: 5
From 1 Ratings

Robust Process Development and Scientific Molding


  • Author : Suhas Kulkarni
  • Publisher : Carl Hanser Verlag GmbH Co KG
  • Release Date : 2017-01-16
  • Genre: Technology & Engineering
  • Pages : 390
  • ISBN 10 : 9781569905876

GET BOOK
Robust Process Development and Scientific Molding Book Description :

The book introduces the reader to the concepts of Scientific Molding and Scientific Processing for Injection Molding, geared towards developing a robust, repeatable, and reproducible (3Rs) molding process. The effects of polymer morphology, thermal transitions, drying, and rheology on the injection molding process are explained in detail. The development of a robust molding process is broken down into two sections and is described as the Cosmetic Process and the Dimensional Process. Scientific molding procedures to establish a 3R process are provided. The concept of Design of Experiments (DOEs) for and in injection molding is explained, providing an insight into the cosmetic and dimensional process windows. A plan to release qualified molds into production with troubleshooting tips is also provided. Topics that impact a robust process such as the use of regrind, mold cooling, and venting are also described. Readers will be able to utilize the knowledge gained from the book in their day-to-day operations immediately. The second edition includes a completely new chapter on Quality Concepts, as well as much additional material throughout the book, covering fountain flow, factors affecting post mold shrinkage, and factor selections for DOEs. There are also further explanations on several topics, such as in-mold rheology curves, cavity imbalances, intensification ratios, gate seal studies, holding time optimization of hot runner molds, valve gated molds, and parts with large gates. A troubleshooting guide for common molded defects is also provided.

Robust Process Development and Scientific Molding Book

Robust Process Development and Scientific Molding


  • Author : Suhas Kulkarni
  • Publisher : Hanser
  • Release Date : 2017
  • Genre: Injection molding of plastics
  • Pages : 367
  • ISBN 10 : 156990586X

GET BOOK
Robust Process Development and Scientific Molding Book Description :

The book introduces the reader to the concepts of Scientific Molding and Scientific Processing for Injection Molding, geared towards developing a robust, repeatable, and reproducible (3Rs) molding process. The effects of polymer morphology, thermal transitions, drying, and rheology on the injection molding process are explained in detail. The development of a robust molding process is broken down into two sections and is described as the Cosmetic Process and the Dimensional Process. Scientific molding procedures to establish a 3R process are provided. The concept of Design of Experiments (DOEs) for and in injection molding is explained, providing an insight into the cosmetic and dimensional process windows. A plan to release qualified molds into production with troubleshooting tips is also provided. Topics that impact a robust process such as the use of regrind, mold cooling, and venting are also described. Readers will be able to utilize the knowledge gained from the book in their day-to-day operations immediately. The second edition includes a completely new chapter on Quality Concepts, as well as much additional material throughout the book, covering fountain flow, factors affecting post mold shrinkage, and factor selections for DOEs. There are also further explanations on several topics, such as in-mold rheology curves, cavity imbalances, intensification ratios, gate seal studies, holding time optimization of hot runner molds, valve gated molds, and parts with large gates. A troubleshooting guide for common molded defects is also provided. With the purchase of this book, you also receive a free personal access code to download the eBook.

Robust Process Development and Scientific Molding Book

Robust Process Development and Scientific Molding


  • Author : Suhas Kulkarni
  • Publisher : Carl Hanser Verlag GmbH Co KG
  • Release Date : 2017-06-06
  • Genre: Technology & Engineering
  • Pages : 390
  • ISBN 10 : 9781569906910

GET BOOK
Robust Process Development and Scientific Molding Book Description :

The book introduces the reader to the concepts of Scientific Molding and Scientific Processing for Injection Molding, geared towards developing a robust, repeatable, and reproducible (3Rs) molding process. The effects of polymer morphology, thermal transitions, drying, and rheology on the injection molding process are explained in detail. The development of a robust molding process is broken down into two sections and is described as the Cosmetic Process and the Dimensional Process. Scientific molding procedures to establish a 3R process are provided. The concept of Design of Experiments (DOEs) for and in injection molding is explained, providing an insight into the cosmetic and dimensional process windows. A plan to release qualified molds into production with troubleshooting tips is also provided. Topics that impact a robust process such as the use of regrind, mold cooling, and venting are also described. Readers will be able to utilize the knowledge gained from the book in their day-to-day operations immediately. The second edition includes a completely new chapter on Quality Concepts, as well as much additional material throughout the book, covering fountain flow, factors affecting post mold shrinkage, and factor selections for DOEs. There are also further explanations on several topics, such as in-mold rheology curves, cavity imbalances, intensification ratios, gate seal studies, holding time optimization of hot runner molds, valve gated molds, and parts with large gates. A troubleshooting guide for common molded defects is also provided.

Computer Modeling for Injection Molding Book

Computer Modeling for Injection Molding


  • Author : Huamin Zhou
  • Publisher : John Wiley & Sons
  • Release Date : 2013-03-04
  • Genre: Science
  • Pages : 397
  • ISBN 10 : 9780470602997

GET BOOK
Computer Modeling for Injection Molding Book Description :

This book covers a wide range of applications and uses of simulation and modeling techniques in polymer injection molding, filling a noticeable gap in the literature of design, manufacturing, and the use of plastics injection molding. The authors help readers solve problems in the advanced control, simulation, monitoring, and optimization of injection molding processes. The book provides a tool for researchers and engineers to calculate the mold filling, optimization of processing control, and quality estimation before prototype molding.

Injection Molding Advanced Troubleshooting Guide Book

Injection Molding Advanced Troubleshooting Guide


  • Author : Randy Kerkstra
  • Publisher : Carl Hanser Verlag GmbH Co KG
  • Release Date : 2018-05-07
  • Genre: Technology & Engineering
  • Pages : 512
  • ISBN 10 : 9781569906460

GET BOOK
Injection Molding Advanced Troubleshooting Guide Book Description :

This highly practical troubleshooting guide solves problems at the machine systematically and quickly. Drawing on a wealth of hands-on experience from the authors, who have built strong reputations in the field, the book is structured by type of problem/solution. Thus, it is an ideal reference to be consulted at the machine. Included is valuable information on robust process windows, cycle time evaluations, scrap savings, and runners/gates with no existing standard in the industry. No other book provides the unique insights found here.

Injection Molding Book

Injection Molding


  • Author : Rong Zheng
  • Publisher : Springer Science & Business Media
  • Release Date : 2011-06-21
  • Genre: Technology & Engineering
  • Pages : 188
  • ISBN 10 : 3642212638

GET BOOK
Injection Molding Book Description :

This book covers fundamental principles and numerical methods relevant to the modeling of the injection molding process. As injection molding processing is related to rheology, mechanical and chemical engineering, polymer science and computational methods, and is a rapidly growing field, the book provides a multidisciplinary and comprehensive introduction to the subjects required for an understanding of the complex process. It addresses the up-to-date status of fundamental understanding and simulation technologies, without losing sight of still useful classical approaches. The main chapters of the book are devoted to the currently active fields of flow-induced crystallization and orientation evolution of fiber suspensions, respectively, followed by detailed discussion of their effects on mechanical property, shrinkage and warpage of injection-molded products. The level of the proposed book will be suitable for interested scientists, R&D engineers, application engineers, and graduate students in engineering.

Unit Manufacturing Processes Book

Unit Manufacturing Processes


  • Author : National Research Council
  • Publisher : National Academies Press
  • Release Date : 1995-01-03
  • Genre: Technology & Engineering
  • Pages : 228
  • ISBN 10 : 0309176670

GET BOOK
Unit Manufacturing Processes Book Description :

Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.

Injection Molding Handbook Book
Score: 4
From 3 Ratings

Injection Molding Handbook


  • Author : D.V. Rosato
  • Publisher : Springer Science & Business Media
  • Release Date : 2012-12-06
  • Genre: Technology & Engineering
  • Pages : 1460
  • ISBN 10 : 9781461545972

GET BOOK
Injection Molding Handbook Book Description :

This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, which range from product design to meeting performance requirements to reducing costs to zero-defect targets. Changes have not been made that concern what is basic to injection molding. However, more basic information has been added concerning present and future developments, resulting in the book being more useful for a long time to come. Detailed explanations and interpretation of individual subjects (more than 1500) are provided, using a total of 914 figures and 209 tables. Throughout the book there is extensive information on problems and solutions as well as extensive cross referencing on its many different subjects. This book represents the ENCYCLOPEDIA on IM, as is evident from its extensive and detailed text that follows from its lengthy Table of CONTENTS and INDEX with over 5200 entries. The worldwide industry encompasses many hundreds of useful plastic-related computer programs. This book lists these programs (ranging from operational training to product design to molding to marketing) and explains them briefly, but no program or series of programs can provide the details obtained and the extent of information contained in this single sourcebook.

Magnesium Injection Molding Book

Magnesium Injection Molding


  • Author : Frank Czerwinski
  • Publisher : Springer Science & Business Media
  • Release Date : 2007-12-07
  • Genre: Technology & Engineering
  • Pages : 592
  • ISBN 10 : 0387725288

GET BOOK
Magnesium Injection Molding Book Description :

The objective of this book, being the first one on magnesium injection molding, is to treat both the scientific background and the technological aspects as they are understood at present. All aspects of material development, manufacturing and engineering are covered. The book provides a single source of information covering the interdisciplinary field of net shape forming of magnesium alloys. It reflects a unique blend of science and industrial practice.

Plastics Injection Molding Book

Plastics Injection Molding


  • Author : José R. Lerma Valero
  • Publisher : Carl Hanser Verlag GmbH Co KG
  • Release Date : 2020-01-20
  • Genre: Technology & Engineering
  • Pages : 424
  • ISBN 10 : 9781569906903

GET BOOK
Plastics Injection Molding Book Description :

"Plastics Injection Molding: Scientific Molding, Recommendations, and Best Practices" is a user-friendly reference book and training tool, with all the essentials to understand injection molding of plastics. It is a practical guide to refining and controlling the process, increasing robustness and consistency, increasing productivity and profitability, and reducing costs. This book contains structured information on process definitions and parameters, optimization methods, key points, interpretation of data sheets, among other useful recommendations regarding both technology and design. It also provides analysis of process deviation, defects, incidents, etc. as well as a section dedicated to material selection and comparison. Includes a bonus of downloadable Excel spreadsheets for application to scientific molding, process analysis, and optimization. This book is aimed at injection molding technicians, process engineers, quality engineers, mold designers, part designers, simulation engineers, team leaders, plant managers, and those responsible for purchasing plastic materials. Contents: -Plastics -Material selection -Injection: machines and processes -Scientific molding -Failure Analysis -Reference material

21st European Symposium on Computer Aided Process Engineering Book

21st European Symposium on Computer Aided Process Engineering


  • Author : E. N. Pistikopoulos
  • Publisher : Elsevier
  • Release Date : 2011-05-26
  • Genre: Science
  • Pages : 2029
  • ISBN 10 : 9780444538956

GET BOOK
21st European Symposium on Computer Aided Process Engineering Book Description :

The European Symposium on Computer Aided Process Engineering (ESCAPE) series presents the latest innovations and achievements of leading professionals from the industrial and academic communities. The ESCAPE series serves as a forum for engineers, scientists, researchers, managers and students to present and discuss progress being made in the area of Computer Aided Process Engineering (CAPE). European industries large and small are bringing innovations into our lives, whether in the form of new technologies to address environmental problems, new products to make our homes more comfortable and energy efficient or new therapies to improve the health and well-being of European citizens. Moreover, the European Industry needs to undertake research and technological initiatives in response to humanity's "Grand Challenges", described in the declaration of Lund, namely, Global Warming, Tightening Supplies of Energy, Water and Food, Ageing Societies, Public Health, Pandemics and Security. Thus, the Technical Theme of ESCAPE 21 will be "Process Systems Approaches for Addressing Grand Challenges in Energy, Environment, Health, Bioprocessing & Nanotechnologies".

Injection Molding Process Control  Monitoring  and Optimization Book

Injection Molding Process Control Monitoring and Optimization


  • Author : Yi Yang
  • Publisher : Carl Hanser Verlag GmbH Co KG
  • Release Date : 2017-04-10
  • Genre: Technology & Engineering
  • Pages : 413
  • ISBN 10 : 9781569906828

GET BOOK
Injection Molding Process Control Monitoring and Optimization Book Description :

Improvement of injection molding processes remains a topic of great interest in both industry and research institutions. This book introduces the analysis of the molding process from a systems technology point of view. It is divided into four parts: the first part provides general background to introduce the injection molding process, the second covers the control of the process, the third is on the monitoring technology, and the fourth is concerned with the optimization of the process. Most the results within are from real engineering implementations and experimental tests.

4M 2006   Second International Conference on Multi Material Micro Manufacture Book

4M 2006 Second International Conference on Multi Material Micro Manufacture


  • Author : Stefan Dimov
  • Publisher : Elsevier
  • Release Date : 2006-09-15
  • Genre: Technology & Engineering
  • Pages : 448
  • ISBN 10 : 008046629X

GET BOOK
4M 2006 Second International Conference on Multi Material Micro Manufacture Book Description :

4M 2006 - Second International Conference on Multi-Material Micro Manufacture covers the latest state-of-the-art research results from leading European researchers in advanced micro technologies for batch processing of metals, polymers, and ceramics, and the development of new production platforms for micro systems-based products. These contributions are from leading authors at a platform endorsed and funded by the European Union R&D community, as well as leading universities, and independent research and corporate organizations. Contains authoritative papers that reflect the latest developments in micro technologies and micro systems-based products

Designing Plastic Parts for Assembly Book

Designing Plastic Parts for Assembly


  • Author : Paul A. Tres
  • Publisher :
  • Release Date : 2014-10-01
  • Genre: Technology & Engineering
  • Pages : 376
  • ISBN 10 : 156990555X

GET BOOK
Designing Plastic Parts for Assembly Book Description :

Advances in Polymer Processing 2020 Book

Advances in Polymer Processing 2020


  • Author : Christian Hopmann
  • Publisher : Springer Nature
  • Release Date : 2020-03-10
  • Genre: Technology & Engineering
  • Pages : 338
  • ISBN 10 : 9783662608098

GET BOOK
Advances in Polymer Processing 2020 Book Description :

This book gathers the proceedings of the International Symposium on Plastics Technology, which was held on March 10, 2020 in Aachen, Germany, and was organised by the Institute for Plastics Processing (IKV) in Industry and Craft at RWTH Aachen University. Peer-reviewed by an international scientific committee, the conference proceedings comprise the papers presented by the international speakers. Topics covered include - circular economy- extrusion- lightweight technologies- simulation and digitisation - injection moulding- hybrid materials and additive manufacturing. In these fields, key themes for plastics technologies have been identified that will shape the face of research and industry for the next decade. In their contributions, the authors present the latest scientific findings, and discuss topical issues in plastics technologies. The symposium offered an inspiring forum for the exchange on research and innovation, for discussing urgent questions and providing impulses for the future of plastics technology.

Hot Melt Extrusion Book

Hot Melt Extrusion


  • Author : Dennis Douroumis
  • Publisher : John Wiley & Sons
  • Release Date : 2012-04-24
  • Genre: Science
  • Pages : 400
  • ISBN 10 : 9781118307878

GET BOOK
Hot Melt Extrusion Book Description :

Hot-melt extrusion (HME) - melting a substance and forcing it through an orifice under controlled conditions to form a new material - is an emerging processing technology in the pharmaceutical industry for the preparation of various dosage forms and drug delivery systems, for example granules and sustained release tablets. Hot-Melt Extrusion: Pharmaceutical Applications covers the main instrumentation, operation principles and theoretical background of HME. It then focuses on HME drug delivery systems, dosage forms and clinical studies (including pharmacokinetics and bioavailability) of HME products. Finally, the book includes some recent and novel HME applications, scale -up considerations and regulatory issues. Topics covered include: principles and die design of single screw extrusion twin screw extrusion techniques and practices in the laboratory and on production scale HME developments for the pharmaceutical industry solubility parameters for prediction of drug/polymer miscibility in HME formulations the influence of plasticizers in HME applications of polymethacrylate polymers in HME HME of ethylcellulose, hypromellose, and polyethylene oxide bioadhesion properties of polymeric films produced by HME taste masking using HME clinical studies, bioavailability and pharmacokinetics of HME products injection moulding and HME processing for pharmaceutical materials laminar dispersive & distributive mixing with dissolution and applications to HME technological considerations related to scale-up of HME processes devices and implant systems by HME an FDA perspective on HME product and process understanding improved process understanding and control of an HME process with near-infrared spectroscopy Hot-Melt Extrusion: Pharmaceutical Applications is an essential multidisciplinary guide to the emerging pharmaceutical uses of this processing technology for researchers in academia and industry working in drug formulation and delivery, pharmaceutical engineering and processin

Powder Injection Molding Book

Powder Injection Molding


  • Author : Randall M. German
  • Publisher :
  • Release Date : 2003
  • Genre: Injection molding of ceramics
  • Pages : 260
  • ISBN 10 : PSU:000051404567

GET BOOK
Powder Injection Molding Book Description :

Injection Molds for Beginners Book

Injection Molds for Beginners


  • Author : Rainer Dangel
  • Publisher :
  • Release Date : 2020-04-06
  • Genre:
  • Pages : 310
  • ISBN 10 : 1569908184

GET BOOK
Injection Molds for Beginners Book Description :

This applications-oriented book describes the construction of an injection mold from the ground up. Included are explanations of the individual types of molds, components, and technical terms; design procedures; techniques, tips, and tricks in the construction of an injection mold; and pros and cons of various solutions. Based on a plastic part ("bowl with lid") specially developed for this book, easily understandable text and many illustrative pictures and drawings provide the necessary knowledge for practical implementation. Step by step, the plastic part is modified and enhanced. The technologies and designs that are additionally needed for an injection mold are described by engineering drawings. Maintenance and repair, and essential manufacturing techniques are also discussed. Now if full color, this second edition builds on the success of the first, with updates and small corrections throughout, as well as an new expanded section covering the process chain.

Building Resilience in Students Impacted by Adverse Childhood Experiences Book

Building Resilience in Students Impacted by Adverse Childhood Experiences


  • Author : Victoria E. Romero
  • Publisher : Corwin Press
  • Release Date : 2018-05-22
  • Genre: Education
  • Pages : 248
  • ISBN 10 : 9781544319438

GET BOOK
Building Resilience in Students Impacted by Adverse Childhood Experiences Book Description :

Use trauma-informed strategies to give students the skills and support they need to succeed in school and life Nearly half of all children have been exposed to at least one adverse childhood experience (ACE), such as poverty, divorce, neglect, substance abuse, or parent incarceration. This workbook-style resource shows K-12 educators how to integrate trauma-informed strategies into daily instructional practice through expanded focus on: The experiences and challenges of students impacted by ACEs, including suicidal tendencies, cyberbullying, and drugs Behavior as a form of communication and how to explicitly teach new behaviors How to mitigate trauma and build innate resiliency

Runner and Gating Design Handbook Book

Runner and Gating Design Handbook


  • Author : John P. Beaumont
  • Publisher : Carl Hanser Verlag GmbH Co KG
  • Release Date : 2019-10-07
  • Genre: Technology & Engineering
  • Pages : 470
  • ISBN 10 : 9781569905913

GET BOOK
Runner and Gating Design Handbook Book Description :

The first book to shed light on the critical role the melt delivery system plays in successful injection molding has received a major update in its 3rd edition. This successful book will give you an immediate leg up by reducing mold commissioning times, increasing productivity, improving customer satisfaction, and achieving quality goals such as Six Sigma. How do you determine the optimum design of your runners and gates; what type of runner system (hot or cold variations) do you use for a specifi c application; how do you identify molding problems generated by the gate and runner vs. those stemming from other molding issues; what should you consider when selecting a gating location? The “Runner and Gate Design Handbook” will give you the means to get to the bottom of these issues as well as provide specifi c guidelines for process optimization and troubleshooting. Highlights among the numerous new updates include coverage and analyses of critical shear induced melt variations that are developed in the runners of all injection molds, expanded content on hot runners, and a new subchapter on injection molding process development.