Steels Book

Steels


  • Author : Robert William Ken Honeycombe
  • Publisher : Unknown
  • Release Date : 1996
  • Genre: Physical metallurgy
  • Pages : 244
  • ISBN 10 : OCLC:1056624160

DOWNLOAD BOOK
Steels Excerpt :

Duplex Stainless Steels Book

Duplex Stainless Steels


  • Author : R Gunn
  • Publisher : Woodhead Publishing
  • Release Date : 1997-10-21
  • Genre: Technology & Engineering
  • Pages : 220
  • ISBN 10 : 1855733188

DOWNLOAD BOOK
Duplex Stainless Steels Excerpt :

Two very successful conferences - in Glasgow and Beaune - were held on duplex stainless steels during the first half of the '90s. This book takes keynote papers from each, and develops and expands them to bring the topics right up to date. There is new material to cover grades, specifications and standards, and the book is fully cross-references and indexed. The first reference book to be published on the increasingly popular duplex stainless steels, it will be widely welcomed by metallurgists, design and materials engineers, oil and gas engineers and anyone involved in materials development and properties. The first reference book on this relatively new engineering material Based on keynote papers from major international contributors Covers grades, standards and specifications

Maraging Steels Book

Maraging Steels


  • Author : W Sha
  • Publisher : Elsevier
  • Release Date : 2009-10-26
  • Genre: Technology & Engineering
  • Pages : 216
  • ISBN 10 : 9781845696931

DOWNLOAD BOOK
Maraging Steels Excerpt :

Maraging steels are high-strength steels combined with good toughness. They are used particularly in aerospace and tooling applications. Maraging refers to the ageing of martensite, a hard microstructure commonly found in steels. Maraging steels: modelling of microstructure, properties and applications covers the following topics: Introduction to maraging steels; Microstructure of maraging steels; Mechanical properties of maraging steels; Thermodynamic calculations for quantifying the phase fraction and element partition in maraging systems and precipitation hardening steels; Quantification of phase transformation kinetics in maraging steels; Quantification of age hardening in maraging steels; Maraging steels and overageing; Precipitation hardening stainless steel; Applications of artificial neural network on modelling maraging steel properties. With its distinguished authors, Maraging steels: modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with maraging steels and modelling as well as users of maraging steels in the aerospace and tooling sectors. The book includes both conventional maraging steels and precipitation hardened (PH) stainless steels. Provides an overview of maraging steels including microstructure and mechanical properties Reviews thermodynamic calculations for quantifying the phase fraction and element partition in maraging steels Includes chapters on the quantification of phase transformation kinetics and age hardening in maraging steels

Austenitic Stainless Steels Book

Austenitic Stainless Steels


  • Author : P. Marshall
  • Publisher : Springer Science & Business Media
  • Release Date : 1984-07-31
  • Genre: Technology & Engineering
  • Pages : 458
  • ISBN 10 : 0853342776

DOWNLOAD BOOK
Austenitic Stainless Steels Excerpt :

Steels  Microstructure and Properties Book

Steels Microstructure and Properties


  • Author : Harry Bhadeshia
  • Publisher : Elsevier
  • Release Date : 2011-04-01
  • Genre: Technology & Engineering
  • Pages : 360
  • ISBN 10 : 9780080462929

DOWNLOAD BOOK
Steels Microstructure and Properties Excerpt :

Steels represent the most widely-used metallic alloy, possessing a wide range of microstructures and mechanical properties. By examining the mechanical properties of steels in conjunction with microstructure this book provides a valuable description of the development and behaviour of these materials - the very foundation of their widespread use. Updated throughout and including new chapters on nanostructured steels, and new alloys and technologies for the energy and automobile industries, the book is clearly written and illustrated, with extensive bibliographies and real-life examples. An essential reference, both compact and readily comprehensive, for metallurgists and engineers in both industry and academia. Covers the microstructure, mechanical behaviour and properties of steels, the most widely-used metallic alloy Thoroughly updated with new materials and technologies Respected author team who bring their wide experience to students and professionals

Carbon Steel Book

Carbon Steel


  • Author : Clyde Phelps
  • Publisher : Unknown
  • Release Date : 2019-03-29
  • Genre: Uncategoriezed
  • Pages : 196
  • ISBN 10 : 1536154350

DOWNLOAD BOOK
Carbon Steel Excerpt :

This compilation opens with a section discussing the key interactions required to successfully friction stir weld carbon steels. Friction stir welding is a relatively recent development, predominantly technologically established using aluminum, where the lower melting point of the material greatly aided the process. Next, corrosion models of carbon steel in aqueous solution are reviewed under atmospheric and oxygen depleted environments by focusing on the cathodic reaction and the corrosion film formed on carbon steel as a function of pH and anions. In conclusion, the temperature relation of interlamellar spacing of pearlite with supercooling in carbon steels, based on a previously theoretically foundation, has been determined by the pearlite and bainite phase volumes in alloy steels from the degree of supercooling.

Microstructure and Texture in Steels Book

Microstructure and Texture in Steels


  • Author : Arunansu Haldar
  • Publisher : Springer Science & Business Media
  • Release Date : 2009-09-03
  • Genre: Technology & Engineering
  • Pages : 488
  • ISBN 10 : 9781848824546

DOWNLOAD BOOK
Microstructure and Texture in Steels Excerpt :

Microstructure and Texture in Steels and Other Materials comprises a collection of articles pertaining to experimental and theoretical aspects of the evolution of crystallographic texture and microstructure during processing of steels and some other materials. Among the topics covered is the processing-microstructure-texture-property relationship in various kinds of steels, including the latest grade. Special emphasis has been given to introduce recent advances in the characterization of texture and microstructure, as well as modeling. The papers included are written by well-known experts from academia and industrial R and D, which will provide the reader with state-of-the-art, in-depth knowledge of the subject. With these attributes, Microstructure and Texture in Steels and Other Materials is expected to serve the cause of creating awareness of current developments in microstructural science and materials engineering among academic and R and D personnel working in the field.

Metallurgy and Design of Alloys with Hierarchical Microstructures Book

Metallurgy and Design of Alloys with Hierarchical Microstructures


  • Author : Krishnan K. Sankaran
  • Publisher : Elsevier
  • Release Date : 2017-06-14
  • Genre: Technology & Engineering
  • Pages : 506
  • ISBN 10 : 9780128120255

DOWNLOAD BOOK
Metallurgy and Design of Alloys with Hierarchical Microstructures Excerpt :

Metallurgy and Design of Alloys with Hierarchical Microstructures covers the fundamentals of processing-microstructure-property relationships and how multiple properties are balanced and optimized in materials with hierarchical microstructures widely used in critical applications. The discussion is based principally on metallic materials used in aircraft structures; however, because they have sufficiently diverse microstructures, the underlying principles can easily be extended to other materials systems. With the increasing microstructural complexity of structural materials, it is important for students, academic researchers and practicing engineers to possess the knowledge of how materials are optimized and how they will behave in service. The book integrates aspects of computational materials science, physical metallurgy, alloy design, process design, and structure-properties relationships, in a manner not done before. It fills a knowledge gap in the interrelationships of multiple microstructural and deformation mechanisms by applying the concepts and tools of designing microstructures for achieving combinations of engineering properties—such as strength, corrosion resistance, durability and damage tolerance in multi-component materials—used for critical structural applications. Discusses the science behind the properties and performance of advanced metallic materials Provides for the efficient design of materials and processes to satisfy targeted performance in materials and structures Enables the selection and development of new alloys for specific applications based upon evaluation of their microstructure as illustrated in this work

Microstructure of Steels and Cast Irons Book

Microstructure of Steels and Cast Irons


  • Author : Madeleine Durand-Charre
  • Publisher : Springer Science & Business Media
  • Release Date : 2013-03-09
  • Genre: Technology & Engineering
  • Pages : 406
  • ISBN 10 : 9783662087299

DOWNLOAD BOOK
Microstructure of Steels and Cast Irons Excerpt :

The book comprises three parts. Part 1 gives a historical description of the development of ironworking techniques since the earliest times. Part 2 is the core of the book and deals with the metallurgical basis of microstructures, with four main themes: phase diagrams, solidification processes, diffusion, and solid state phase transformations. Part 3 begins by an introduction to steel design principles. It then goes on to consider the different categories of steels, placing emphasis on their specific microstructural features. Finally, a comprehensive reference list includes several hundred pertinent articles and books. The book is the work of a single author, thus ensuring uniformity and concision. It is intended for scientists, metallurgical engineers and senior technicians in research and development laboratories, design offices and quality departments, as well as for teachers and students in universities, technical colleges and other higher education establishments.

Control of Microstructures and Properties in Steel Arc Welds Book

Control of Microstructures and Properties in Steel Arc Welds


  • Author : Lars-Erik Svensson
  • Publisher : Routledge
  • Release Date : 2017-09-20
  • Genre: Technology & Engineering
  • Pages : 256
  • ISBN 10 : 9781351457972

DOWNLOAD BOOK
Control of Microstructures and Properties in Steel Arc Welds Excerpt :

Control of Microstructures and Properties in Steel Arc Welds provides an overview of the most recent developments in welding metallurgy. Topics discussed include common welding processes, the thermal cycle during welding, defects that may occur during the welding process, the metallurgy of the material, metallurgical processes in the heat-affected zone and the fused metal, and the relationship between microstructures and mechanical properties. The book's final chapter presents examples of welded joints, illustrating how modern theories are capable of predicting the microstructure and properties of these joints. This book is an excellent resource for welding engineers, metallurgists, materials scientists, and others interested in the subject.

Stainless Steel Book

Stainless Steel


  • Author : Animesh Kumar Basak
  • Publisher : Nova Science Pub Incorporated
  • Release Date : 2015-04-01
  • Genre: Technology & Engineering
  • Pages : 241
  • ISBN 10 : 1634820800

DOWNLOAD BOOK
Stainless Steel Excerpt :

Stainless steel, termed as the "miracle metal" is all around us in numerous applications ranging from everyday household items to sophisticated biomedical applications. Stainless steel is one of the fastest growing segments in metal industries. New developments and a wide range of research on stainless steel is taking place all around the world in order to obtain superior quality stainless steel and expand its applications to meet growing demands. Taking those facts into account, this book is compiles recent developments in the properties, applications and further processing of stainless steel and recent research trends. The book includes high-tech characterisation techniques of stainless steel to address the decomposition behaviour; decomposition-induced transformation to the correlated property-microstructure; powder metallurgy to produce difficult-to-cast stainless steel components, depassivation / repassivation behaviour, various surface treatment processes as well as a wide range of machining techniques to address the need of machinability of stainless steel.

Microstructure and Properties of Materials Book

Microstructure and Properties of Materials


  • Author : J C M Li
  • Publisher : World Scientific Publishing Company
  • Release Date : 2000-10-09
  • Genre: Technology & Engineering
  • Pages : 452
  • ISBN 10 : 9789813105652

DOWNLOAD BOOK
Microstructure and Properties of Materials Excerpt :

This is the second volume of an advanced textbook on microstructure and properties of materials. (The first volume is on aluminum alloys, nickel-based superalloys, metal matrix composites, polymer matrix composites, ceramics matrix composites, inorganic glasses, superconducting materials and magnetic materials). It covers titanium alloys, titanium aluminides, iron aluminides, iron and steels, iron-based bulk amorphous alloys and nanocrystalline materials. There are many elementary materials science textbooks, but one can find very few advanced texts suitable for graduate school courses. The contributors to this volume are experts in the subject, and hence, together with the first volume, it is a good text for graduate microstructure courses. It is a rich source of design ideas and applications, and will provide a good understanding of how microstructure affects the properties of materials. Chapter 1, on titanium alloys, covers production, thermomechanical processing, microstructure, mechanical properties and applications. Chapter 2, on titanium aluminides, discusses phase stability, bulk and defect properties, deformation mechanisms of single phase materials and polysynthetically twinned crystals, and interfacial structures and energies between phases of different compositions. Chapter 3, on iron aluminides, reviews the physical and mechanical metallurgy of Fe3Al and FeAl, the two important structural intermetallics. Chapter 4, on iron and steels, presents methodology, microstructure at various levels, strength, ductility and strengthening, toughness and toughening, environmental cracking and design against fracture for many different kinds of steels. Chapter 5, on bulk amorphous alloys, covers the critical cooling rate and the effect of composition on glass formation and the accompanying mechanical and magnetic properties of the glasses. Chapter 6, on nanocrystalline materials, describes the preparation from vapor, liquid and solid states, microstructure including

Advanced High Strength Steels Book
Score: 3
From 1 Ratings

Advanced High Strength Steels


  • Author : Mahmoud Y. Demeri
  • Publisher : ASM International
  • Release Date : 2013-08-01
  • Genre: Electronic book
  • Pages : 312
  • ISBN 10 : 9781627080057

DOWNLOAD BOOK
Advanced High Strength Steels Excerpt :

Examines the types, microstructures and attributes of AHSSAlso reviews the current and future applications, the benefits, trends and environmental and sustainability issues.

Powder Metallurgy Stainless Steels Book
Score: 4
From 1 Ratings

Powder Metallurgy Stainless Steels


  • Author : Erhard Klar
  • Publisher : ASM International
  • Release Date : 2007
  • Genre: Technology & Engineering
  • Pages : 243
  • ISBN 10 : 9781615030521

DOWNLOAD BOOK
Powder Metallurgy Stainless Steels Excerpt :

Thermomechanical Processing of High Strength Low Alloy Steels Book

Thermomechanical Processing of High Strength Low Alloy Steels


  • Author : Imao Tamura
  • Publisher : Butterworth-Heinemann
  • Release Date : 2013-10-22
  • Genre: Technology & Engineering
  • Pages : 256
  • ISBN 10 : 9781483164052

DOWNLOAD BOOK
Thermomechanical Processing of High Strength Low Alloy Steels Excerpt :

Thermomechanical Processing of High-Strength Low-Alloy Steels considers some advanced techniques and metallurgical bases for controlled-rolling. This book contains 12 chapters. In Chapter 1, the purpose of thermomechanical processing and historical survey is described, while in Chapter 2, the kinetics of phase transformations and refinement of grain size in steels are elaborated. The techniques and metallurgical bases for controlled-rolling in the recrystallization, non-recrystallization, and (? + y) regions are reviewed in Chapters 3 to 5. Chapters 6 and 7 discuss the deformation resistance during hot-rolling and restoration processes. The phase transformations during cooling following hot-rolling are mentioned in Chapter 8, followed by a summarization of the effects of alloying elements in Chapter 9. Chapters 10 and 11 deal with the mechanical properties of controlled-rolled steel and prediction and control of microstructure and properties by thermomechanical processes. The problems faced and possibilities for future developments are stated in the last chapter. This publication is recommended for physicists, metallurgists, and researchers concerned with controlled-rolling, including non-specialists who have some knowledge of metallurgy.