Topics in Parallel and Distributed Computing Book

Topics in Parallel and Distributed Computing


  • Author : Sushil K Prasad
  • Publisher : Morgan Kaufmann
  • Release Date : 2015-09-16
  • Genre: Computers
  • Pages : 360
  • ISBN 10 : 9780128039380

DOWNLOAD BOOK
Topics in Parallel and Distributed Computing Excerpt :

Topics in Parallel and Distributed Computing provides resources and guidance for those learning PDC as well as those teaching students new to the discipline. The pervasiveness of computing devices containing multicore CPUs and GPUs, including home and office PCs, laptops, and mobile devices, is making even common users dependent on parallel processing. Certainly, it is no longer sufficient for even basic programmers to acquire only the traditional sequential programming skills. The preceding trends point to the need for imparting a broad-based skill set in PDC technology. However, the rapid changes in computing hardware platforms and devices, languages, supporting programming environments, and research advances, poses a challenge both for newcomers and seasoned computer scientists. This edited collection has been developed over the past several years in conjunction with the IEEE technical committee on parallel processing (TCPP), which held several workshops and discussions on learning parallel computing and integrating parallel concepts into courses throughout computer science curricula. Contributed and developed by the leading minds in parallel computing research and instruction Provides resources and guidance for those learning PDC as well as those teaching students new to the discipline Succinctly addresses a range of parallel and distributed computing topics Pedagogically designed to ensure understanding by experienced engineers and newcomers Developed over the past several years in conjunction with the IEEE technical committee on parallel processing (TCPP), which held several workshops and discussions on learning parallel computing and integrating parallel concepts

Topics in Parallel and Distributed Computing Book

Topics in Parallel and Distributed Computing


  • Author : Sushil K. Prasad
  • Publisher : Morgan Kaufmann Publishers
  • Release Date : 2015-08-21
  • Genre: Uncategoriezed
  • Pages : 360
  • ISBN 10 : 0128038993

DOWNLOAD BOOK
Topics in Parallel and Distributed Computing Excerpt :

Topics in Parallel and Distributed Computing provides resources and guidance for those learning PDC as well as those teaching students new to the discipline. The pervasiveness of computing devices containing multicore CPUs and GPUs, including home and office PCs, laptops, and mobile devices, is making even common users dependent on parallel processing. Certainly, it is no longer sufficient for even basic programmers to acquire only the traditional sequential programming skills. The preceding trends point to the need for imparting a broad-based skill set in PDC technology. However, the rapid changes in computing hardware platforms and devices, languages, supporting programming environments, and research advances, poses a challenge both for newcomers and seasoned computer scientists. This edited collection has been developed over the past several years in conjunction with the IEEE technical committee on parallel processing (TCPP), which held several workshops and discussions on learning parallel computing and integrating parallel concepts into courses throughout computer science curricula. Contributed and developed by the leading minds in parallel computing research and instruction Provides resources and guidance for those learning PDC as well as those teaching students new to the discipline Succinctly addresses a range of parallel and distributed computing topics Pedagogically designed to ensure understanding by experienced engineers and newcomers Developed over the past several years in conjunction with the IEEE technical committee on parallel processing (TCPP), which held several workshops and discussions on learning parallel computing and integrating parallel concepts

Distributed Computing Book
Score: 3
From 2 Ratings

Distributed Computing


  • Author : Hagit Attiya
  • Publisher : John Wiley & Sons
  • Release Date : 2004-03-25
  • Genre: Computers
  • Pages : 440
  • ISBN 10 : 0471453242

DOWNLOAD BOOK
Distributed Computing Excerpt :

* Comprehensive introduction to the fundamental results in the mathematical foundations of distributed computing * Accompanied by supporting material, such as lecture notes and solutions for selected exercises * Each chapter ends with bibliographical notes and a set of exercises * Covers the fundamental models, issues and techniques, and features some of the more advanced topics

Encyclopedia of Parallel Computing Book

Encyclopedia of Parallel Computing


  • Author : David Padua
  • Publisher : Springer Science & Business Media
  • Release Date : 2011-09-08
  • Genre: Computers
  • Pages : 2211
  • ISBN 10 : 9780387097657

DOWNLOAD BOOK
Encyclopedia of Parallel Computing Excerpt :

Containing over 300 entries in an A-Z format, the Encyclopedia of Parallel Computing provides easy, intuitive access to relevant information for professionals and researchers seeking access to any aspect within the broad field of parallel computing. Topics for this comprehensive reference were selected, written, and peer-reviewed by an international pool of distinguished researchers in the field. The Encyclopedia is broad in scope, covering machine organization, programming languages, algorithms, and applications. Within each area, concepts, designs, and specific implementations are presented. The highly-structured essays in this work comprise synonyms, a definition and discussion of the topic, bibliographies, and links to related literature. Extensive cross-references to other entries within the Encyclopedia support efficient, user-friendly searchers for immediate access to useful information. Key concepts presented in the Encyclopedia of Parallel Computing include; laws and metrics; specific numerical and non-numerical algorithms; asynchronous algorithms; libraries of subroutines; benchmark suites; applications; sequential consistency and cache coherency; machine classes such as clusters, shared-memory multiprocessors, special-purpose machines and dataflow machines; specific machines such as Cray supercomputers, IBM’s cell processor and Intel’s multicore machines; race detection and auto parallelization; parallel programming languages, synchronization primitives, collective operations, message passing libraries, checkpointing, and operating systems. Topics covered: Speedup, Efficiency, Isoefficiency, Redundancy, Amdahls law, Computer Architecture Concepts, Parallel Machine Designs, Benmarks, Parallel Programming concepts & design, Algorithms, Parallel applications. This authoritative reference will be published in two formats: print and online. The online edition features hyperlinks to cross-references and to additional significant research. Related Subjects:

Patterns and Skeletons for Parallel and Distributed Computing Book

Patterns and Skeletons for Parallel and Distributed Computing


  • Author : Fethi A. Rabhi
  • Publisher : Springer Science & Business Media
  • Release Date : 2011-06-28
  • Genre: Computers
  • Pages : 334
  • ISBN 10 : 9781447100973

DOWNLOAD BOOK
Patterns and Skeletons for Parallel and Distributed Computing Excerpt :

Patterns and Skeletons for Parallel and Distributed Computing is a unique survey of research work in high-level parallel and distributed computing over the past ten years. Comprising contributions from the leading researchers in Europe and the US, it looks at interaction patterns and their role in parallel and distributed processing, and demonstrates for the first time the link between skeletons and design patterns. It focuses on computation and communication structures that are beyond simple message-passing or remote procedure calling, and also on pragmatic approaches that lead to practical design and programming methodologies with their associated compilers and tools. The book is divided into two parts which cover: skeletons-related material such as expressing and composing skeletons, formal transformation, cost modelling and languages, compilers and run-time systems for skeleton-based programming.- design patterns and other related concepts, applied to other areas such as real-time, embedded and distributed systems. It will be an essential reference for researchers undertaking new projects in this area, and will also provide useful background reading for advanced undergraduate and postgraduate courses on parallel or distributed system design.

Distributed and Cloud Computing Book

Distributed and Cloud Computing


  • Author : Kai Hwang
  • Publisher : Morgan Kaufmann
  • Release Date : 2013-12-18
  • Genre: Computers
  • Pages : 672
  • ISBN 10 : 9780128002049

DOWNLOAD BOOK
Distributed and Cloud Computing Excerpt :

Distributed and Cloud Computing: From Parallel Processing to the Internet of Things offers complete coverage of modern distributed computing technology including clusters, the grid, service-oriented architecture, massively parallel processors, peer-to-peer networking, and cloud computing. It is the first modern, up-to-date distributed systems textbook; it explains how to create high-performance, scalable, reliable systems, exposing the design principles, architecture, and innovative applications of parallel, distributed, and cloud computing systems. Topics covered by this book include: facilitating management, debugging, migration, and disaster recovery through virtualization; clustered systems for research or ecommerce applications; designing systems as web services; and social networking systems using peer-to-peer computing. The principles of cloud computing are discussed using examples from open-source and commercial applications, along with case studies from the leading distributed computing vendors such as Amazon, Microsoft, and Google. Each chapter includes exercises and further reading, with lecture slides and more available online. This book will be ideal for students taking a distributed systems or distributed computing class, as well as for professional system designers and engineers looking for a reference to the latest distributed technologies including cloud, P2P and grid computing. Complete coverage of modern distributed computing technology including clusters, the grid, service-oriented architecture, massively parallel processors, peer-to-peer networking, and cloud computing Includes case studies from the leading distributed computing vendors: Amazon, Microsoft, Google, and more Explains how to use virtualization to facilitate management, debugging, migration, and disaster recovery Designed for undergraduate or graduate students taking a distributed systems course—each chapter includes exercises and further reading, with lecture slides and more avai

Assignment Problems in Parallel and Distributed Computing Book

Assignment Problems in Parallel and Distributed Computing


  • Author : Shahid H. Bokhari
  • Publisher : Springer Science & Business Media
  • Release Date : 2012-12-06
  • Genre: Computers
  • Pages : 156
  • ISBN 10 : 9781461320036

DOWNLOAD BOOK
Assignment Problems in Parallel and Distributed Computing Excerpt :

This book has been written for practitioners, researchers and stu dents in the fields of parallel and distributed computing. Its objective is to provide detailed coverage of the applications of graph theoretic tech niques to the problems of matching resources and requirements in multi ple computer systems. There has been considerable research in this area over the last decade and intense work continues even as this is being written. For the practitioner, this book serves as a rich source of solution techniques for problems that are routinely encountered in the real world. Algorithms are presented in sufficient detail to permit easy implementa tion; background material and fundamental concepts are covered in full. The researcher will find a clear exposition of graph theoretic tech niques applied to parallel and distributed computing. Research results are covered and many hitherto unpublished spanning the last decade results by the author are included. There are many unsolved problems in this field-it is hoped that this book will stimulate further research.

Introduction to Parallel Computing Book

Introduction to Parallel Computing


  • Author : Roman Trobec
  • Publisher : Springer
  • Release Date : 2018-09-27
  • Genre: Computers
  • Pages : 256
  • ISBN 10 : 9783319988337

DOWNLOAD BOOK
Introduction to Parallel Computing Excerpt :

Advancements in microprocessor architecture, interconnection technology, and software development have fueled rapid growth in parallel and distributed computing. However, this development is only of practical benefit if it is accompanied by progress in the design, analysis and programming of parallel algorithms. This concise textbook provides, in one place, three mainstream parallelization approaches, Open MPP, MPI and OpenCL, for multicore computers, interconnected computers and graphical processing units. An overview of practical parallel computing and principles will enable the reader to design efficient parallel programs for solving various computational problems on state-of-the-art personal computers and computing clusters. Topics covered range from parallel algorithms, programming tools, OpenMP, MPI and OpenCL, followed by experimental measurements of parallel programs’ run-times, and by engineering analysis of obtained results for improved parallel execution performances. Many examples and exercises support the exposition.

Cyber Security in Parallel and Distributed Computing Book

Cyber Security in Parallel and Distributed Computing


  • Author : Dac-Nhuong Le
  • Publisher : John Wiley & Sons
  • Release Date : 2019-04-16
  • Genre: Computers
  • Pages : 292
  • ISBN 10 : 9781119488057

DOWNLOAD BOOK
Cyber Security in Parallel and Distributed Computing Excerpt :

The book contains several new concepts, techniques, applications and case studies for cyber securities in parallel and distributed computing The main objective of this book is to explore the concept of cybersecurity in parallel and distributed computing along with recent research developments in the field. Also included are various real-time/offline applications and case studies in the fields of engineering and computer science and the modern tools and technologies used. Information concerning various topics relating to cybersecurity technologies is organized within the sixteen chapters of this book. Some of the important topics covered include: Research and solutions for the problem of hidden image detection Security aspects of data mining and possible solution techniques A comparative analysis of various methods used in e-commerce security and how to perform secure payment transactions in an efficient manner Blockchain technology and how it is crucial to the security industry Security for the Internet of Things Security issues and challenges in distributed computing security such as heterogeneous computing, cloud computing, fog computing, etc. Demonstrates the administration task issue in unified cloud situations as a multi-target enhancement issue in light of security Explores the concepts of cybercrime and cybersecurity and presents the statistical impact it is having on organizations Security policies and mechanisms, various categories of attacks (e.g., denial-of-service), global security architecture, along with distribution of security mechanisms Security issues in the healthcare sector with existing solutions and emerging threats.

Topics in Parallel and Distributed Computing Book

Topics in Parallel and Distributed Computing


  • Author : Sushil K. Prasad
  • Publisher : Springer
  • Release Date : 2018-09-29
  • Genre: Computers
  • Pages : 337
  • ISBN 10 : 9783319931098

DOWNLOAD BOOK
Topics in Parallel and Distributed Computing Excerpt :

This book introduces beginning undergraduate students of computing and computational disciplines to modern parallel and distributed programming languages and environments, including map-reduce, general-purpose graphics processing units (GPUs), and graphical user interfaces (GUI) for mobile applications. The book also guides instructors via selected essays on what and how to introduce parallel and distributed computing topics into the undergraduate curricula, including quality criteria for parallel algorithms and programs, scalability, parallel performance, fault tolerance, and energy efficiency analysis. The chapters designed for students serve as supplemental textual material for early computing core courses, which students can use for learning and exercises. The illustrations, examples, and sequences of smaller steps to build larger concepts are also tools that could be inserted into existing instructor material. The chapters intended for instructors are written at a teaching level and serve as a rigorous reference to include learning goals, advice on presentation and use of the material, within early and advanced undergraduate courses. Since Parallel and Distributed Computing (PDC) now permeates most computing activities, imparting a broad-based skill set in PDC technology at various levels in the undergraduate educational fabric woven by Computer Science (CS) and Computer Engineering (CE) programs as well as related computational disciplines has become essential. This book and others in this series aim to address the need for lack of suitable textbook support for integrating PDC-related topics into undergraduate courses, especially in the early curriculum. The chapters are aligned with the curricular guidelines promulgated by the NSF/IEEE-TCPP Curriculum Initiative on Parallel and Distributed Computing for CS and CE students and with the CS2013 ACM/IEEE Computer Science Curricula.

Parallel and Distributed Computing  Applications and Technologies Book

Parallel and Distributed Computing Applications and Technologies


  • Author : Yong Zhang
  • Publisher : Springer Nature
  • Release Date : 2021-02-20
  • Genre: Computers
  • Pages : 402
  • ISBN 10 : 9783030692445

DOWNLOAD BOOK
Parallel and Distributed Computing Applications and Technologies Excerpt :

This book constitutes the proceedings of the 21st International Conference on Parallel and Distributed Computing, Applications, and Technologies, PDCAT 2020, which took place in Shenzhen, China, during December 28-30, 2020. The 34 full papers included in this volume were carefully reviewed and selected from 109 submissions. They deal with parallel and distributed computing of networking and architectures, software systems and technologies, algorithms and applications, and security and privacy.

Parallel Programming Book

Parallel Programming


  • Author : Thomas Rauber
  • Publisher : Springer Science & Business Media
  • Release Date : 2013-06-13
  • Genre: Computers
  • Pages : 516
  • ISBN 10 : 9783642378010

DOWNLOAD BOOK
Parallel Programming Excerpt :

Innovations in hardware architecture, like hyper-threading or multicore processors, mean that parallel computing resources are available for inexpensive desktop computers. In only a few years, many standard software products will be based on concepts of parallel programming implemented on such hardware, and the range of applications will be much broader than that of scientific computing, up to now the main application area for parallel computing. Rauber and Rünger take up these recent developments in processor architecture by giving detailed descriptions of parallel programming techniques that are necessary for developing efficient programs for multicore processors as well as for parallel cluster systems and supercomputers. Their book is structured in three main parts, covering all areas of parallel computing: the architecture of parallel systems, parallel programming models and environments, and the implementation of efficient application algorithms. The emphasis lies on parallel programming techniques needed for different architectures. For this second edition, all chapters have been carefully revised. The chapter on architecture of parallel systems has been updated considerably, with a greater emphasis on the architecture of multicore systems and adding new material on the latest developments in computer architecture. Lastly, a completely new chapter on general-purpose GPUs and the corresponding programming techniques has been added. The main goal of the book is to present parallel programming techniques that can be used in many situations for a broad range of application areas and which enable the reader to develop correct and efficient parallel programs. Many examples and exercises are provided to show how to apply the techniques. The book can be used as both a textbook for students and a reference book for professionals. The material presented has been used for courses in parallel programming at different universities for many years.

Introduction to Parallel Computing Book

Introduction to Parallel Computing


  • Author : Zbigniew J. Czech
  • Publisher : Cambridge University Press
  • Release Date : 2017-01-11
  • Genre: Computers
  • Pages : 383
  • ISBN 10 : 9781107174399

DOWNLOAD BOOK
Introduction to Parallel Computing Excerpt :

A comprehensive guide for students and practitioners to parallel computing models, processes, metrics, and implementation in MPI and OpenMP.

Topics in Parallel and Distributed Computing Book

Topics in Parallel and Distributed Computing


  • Author : Sushil K. Prasad
  • Publisher : Springer
  • Release Date : 2018-08-24
  • Genre: Computers
  • Pages : 337
  • ISBN 10 : 3319931083

DOWNLOAD BOOK
Topics in Parallel and Distributed Computing Excerpt :

This book introduces beginning undergraduate students of computing and computational disciplines to modern parallel and distributed programming languages and environments, including map-reduce, general-purpose graphics processing units (GPUs), and graphical user interfaces (GUI) for mobile applications. The book also guides instructors via selected essays on what and how to introduce parallel and distributed computing topics into the undergraduate curricula, including quality criteria for parallel algorithms and programs, scalability, parallel performance, fault tolerance, and energy efficiency analysis. The chapters designed for students serve as supplemental textual material for early computing core courses, which students can use for learning and exercises. The illustrations, examples, and sequences of smaller steps to build larger concepts are also tools that could be inserted into existing instructor material. The chapters intended for instructors are written at a teaching level and serve as a rigorous reference to include learning goals, advice on presentation and use of the material, within early and advanced undergraduate courses. Since Parallel and Distributed Computing (PDC) now permeates most computing activities, imparting a broad-based skill set in PDC technology at various levels in the undergraduate educational fabric woven by Computer Science (CS) and Computer Engineering (CE) programs as well as related computational disciplines has become essential. This book and others in this series aim to address the need for lack of suitable textbook support for integrating PDC-related topics into undergraduate courses, especially in the early curriculum. The chapters are aligned with the curricular guidelines promulgated by the NSF/IEEE-TCPP Curriculum Initiative on Parallel and Distributed Computing for CS and CE students and with the CS2013 ACM/IEEE Computer Science Curricula.

Handbook on Parallel and Distributed Processing Book

Handbook on Parallel and Distributed Processing


  • Author : Jacek Blazewicz
  • Publisher : Springer Science & Business Media
  • Release Date : 2013-03-09
  • Genre: Computers
  • Pages : 635
  • ISBN 10 : 9783662043035

DOWNLOAD BOOK
Handbook on Parallel and Distributed Processing Excerpt :

Here, authors from academia and practice provide practitioners, scientists and graduates with basic methods and paradigms, as well as important issues and trends across the spectrum of parallel and distributed processing. In particular, they cover such fundamental topics as efficient parallel algorithms, languages for parallel processing, parallel operating systems, architecture of parallel and distributed systems, management of resources, tools for parallel computing, parallel database systems and multimedia object servers, as well as the relevant networking aspects. A chapter is dedicated to each of parallel and distributed scientific computing, high-performance computing in molecular sciences, and multimedia applications for parallel and distributed systems.